Sectors Set 3
This resource is part of the set for “Engineering and manufacturing past, present, and future”
Aim: Explore the field of electrical and electronic engineering.
Identify the activities, products, and services provided in the electrical and electronic industry.
Investigate the job roles in the electrical engineering industry.
Understand the role of control and medical engineering.
Identify the activities, products, and services provided in the control and medical industry.
Examine and discuss the industry of designing and manufacturing prosthetics that utilise input controls to manipulate artificial limbs.
Learn about manufacturing and marine engineering.
Identify the activities, products, and services provided in the manufacturing and marine industry.
Group presentation relating to the manufacturing processes that are used in industry.
Investigate the Piper Alpha tragedy and its impact on the modern marine industry.
This resource includes:
Session Power-point file (23 slides)
3 assorted task sheets to accompany the PPT activities
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Sectors Set 4
This resource is part of the set for “Engineering and manufacturing past, present, and future”
Aim: Explore the field of petrochemical and power generation engineering.
Identify the activities, products, and services provided in the petrochemical and power generation industry.
Compare the different methods of power generation and give the advantages and disadvantages of each.
Understand the role of telecommunications engineering.
Identify the activities, products, and services provided in the telecommunications industry.
Group discuss the future of the telecoms industry, comparing with historical advancements.
Learn about water and waste management engineering.
Identify the activities, products, and services provided in the water and waste management industry.
Investigate all of the different job roles that exist in the water treatment industry.
Examine your colleges waste management policy and discuss ways in which it may be improved/evolved.
This resource includes:
Session Power-point file (28 slides)
3 assorted task sheets to accompany the PPT activities
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Advancements 4 - Housing
This resource is part of the set for “Engineering and manufacturing past, present, and future”
Aim: Explore significant technological advances in engineering history.
Understand their impact on social and economic development
Learn about areas of innovation and emerging trends in engineering.
Understand their potential impact on manufacturing, environment, and society
Explore how technology advances have influenced social and economic development.
Understand their impact on transportation, healthcare, housing, employment, and sustainability
This resource includes:
Session Power-point file (12 slides)
2 documents to accompany the PPT file activities
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Types of Materials and Their Structures - Polymers 1
Aim: Understand thermoplastic and thermosetting polymers, as well as elastomers.
This resource includes:
Session Power-point file (12 slides)
Information document on Polymers
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Heat Treatments 1
Aim: Learn about various heat treatment processes, such as case hardening and tempering.
This resource includes:
Session Power-point file (14 slides)
Heat Treated Products Handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Engineering Materials 27 - Material Failure Aging and Physical 1
Aim: Learn about aging and physical failures, such as deformation, fracture, fatigue, and creep.
This resource includes:
Session Power-point file (16 slides)
Stress Failure task Handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Approaches to Design
This resource is part of the set for “Working In Engineering”
Aim: Learn about anthropometric data and its role in ergonomic design. Understand design for manufacture and assembly principles.
Explore various approaches to design, including linear design, iterative design, and sustainable design.
This resource includes:
Session Power-point file (18 slides)
Information Handout
Using data in design handout
Design Approach handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Roles and Functions in Maintenance
This resource is part of the set for “Working In Engineering”
Aim: Understand the roles and functions of different personnel involved in maintenance activities.
This resource includes:
Session Power-point file (19 slides)
Information Sheet handout
Machine operator roles handout
Maintenance engineer roles handout
Contacting employers Handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Computer-Aided Manufacture (CAM)
This resource is part of the set for “Working In Engineering”
Aim: Explore computer-aided manufacture (CAM) systems and software and their application in manufacturing.
This resource includes:
Session Power-point file (19 slides)
Information sheet handout
CAM handout
Careers handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Measurement Devices and Installation Requirements
This resource is part of the set for “Working In Engineering”
Aim: Understand the importance of measurement devices in maintenance and the requirements for proper equipment installation.
This resource includes:
Session Power-point file (21 slides)
Information sheet handout
Measurement Devices Handout
Data Analysis handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Introduction to Approaches in Manufacturing
This resource is part of the set for “Working In Engineering”
Aim: Understand the different approaches to manufacturing, including scale of manufacture and levels of automation.
This resource includes:
Session Power-point file (19 slides)
Information Handout
Methods of Manufacturing Handout
Evaluation Handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Manufacturing Infrastructure
This resource is part of the set for “Working In Engineering”
Aim: Learn about various manufacturing infrastructures, including functional, product, and matrix arrangements.
This resource includes:
Session Power-point file (21 slides)
Information Sheet handout
Product arrangement handout
Hybrid arrangement handout
Cellular arrangement handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Explore the range of SI and Imperial units used in engineering contexts.
This resource is part of the set for “Essential science for engineering and manufacturing”
Aim: Explore the relationship between mechanical properties and material behaviour.
This resource includes:
Session Power-point file (19 slides)
Unit conversion mistakes research - Doc and PDF
Conversion units - Doc and PDF
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Tools and Equipment in Maintenance
This resource is part of the set for “Working In Engineering”
Aim: Explore various tools and equipment used in maintenance activities, including mechanical and electrical tools.
This resource includes:
Session Power-point file (18 slides)
Information sheet handout
Mechanical tools handout
electrical tools handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Development in Maintenance
This resource is part of the set for “Working In Engineering”
Aim: Learn about recent developments in maintenance, including the influence of new technologies and environmental considerations.
This resource includes:
Session Power-point file (21 slides)
Information sheet handout
Developments handout
Green maintenance handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Chemical Behaviours: Electricity and Electrolysis 2
This resource is part of the set for “Essential science for engineering and manufacturing”
Aim: Understand the reactions of metals and alloys with weak and strong acids and alkalis.
This resource includes:
Session Power-point file (18 slides)
Formative Assessment Task
Formative assessment PDF
Formative assessment Teacher copy
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Chemical Composition: Atomic Structure and Chemical Structure 2
This resource is part of the set for “Essential science for engineering and manufacturing”
Aim: Explore the classification of chemicals and their applications in engineering.
This resource includes:
Session Power-point file (21 slides)
Classification of Chemicals Information sheet
Classification of Chemicals information Sheet PDF
Chemical Classification task
Chemical classification PDF
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Quality Control and Performance Monitoring
This resource is part of the set for “Working In Engineering”
Aim: Understand the importance of quality control and performance monitoring in manufacturing.
This resource includes:
Session Power-point file (19 slides)
Revision helpsheet
Monitoring performance paper
Monitoring performance teacher copy
QC methods handout
Controls handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Summative assessment
This resource is part of the set for “Essential science for engineering and manufacturing”
Aim: Prepare for the final examination and address any areas of difficulty.
This resource includes:
Session Power-point files - 2 Files (short as this is assessment)
Summative assessment
Summative assessment PDF
Summative Assessment teacher copy - Answers
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.
Mechanical Testing 1
Aim: Understand mechanical testing methods, including tensile testing and hardness testing.
This resource includes:
Session Power-point file (16 slides)
Testing of Materials handout
Please feel free to check out our other resources, over the next academic year we will be adding a whole host of resources to support teaching Engineering.